Products > Cadram Resin System
Equipment
HDDS Xtreme
- Full cast steel frame for large industrial applications
- Fast and accurate plotting up to 100mm per sec
- Increased levels of control through servo-driven pumps
- Quick-change pumps allow rapid change of colour
cadram resin systems
Technical Specifications
| Bed Height | |||||
|---|---|---|---|---|---|
| Standard Bed Height | 850mm |
||||
| Working Height (all models other than Tabletop) | |||||
|---|---|---|---|---|---|
| Gantry height above table | Maximum 150mm | ||||
| Glass Thickness | |||||
|---|---|---|---|---|---|
| Maximum Thickness | 75mm | ||||
| Speed | |||||
|---|---|---|---|---|---|
| Plotting Speed | Up to 140mm/sec | ||||
| Dispensing Speed | Up to 100mm/sec |
||||
| Precision | |||||
|---|---|---|---|---|---|
| Positioning Resolution | X and Y 0.05mm Z = 0.0125mm | ||||
| Addressable Resolution | Up to 0.40mm | ||||
| Repeatability | Up to 0.20mm |
||||
| Dispensing System | |||||
|---|---|---|---|---|---|
| Cadram Mk6 pumps | Two component servo motor driven pumps
Delivery (bead width) controlled by computer
Gantry mounted open outline resin canisters
supply static mixer dispensing tip via aluminium
mixing head |
||||
| Transport System | |||||
|---|---|---|---|---|---|
| X Drive System | Dual linear guide rails driven by 25mm Ball Screw and under table mounted 800w Servo motor | ||||
| Y Drive System | Dual Linear guide rail driven by 25mm ball screw with gantry mounted 800w servo motor | ||||
| Z Drive System | Dual linear guide rail with direct drive to 16mm ball
screw with 800w servo motor |
||||
| Software | |||||
|---|---|---|---|---|---|
| CADRAM Artplot© | Accepts HPGL and DXF. Multi Functional software | ||||
| Power Requirements | |||||
|---|---|---|---|---|---|
| Power Supply | 380v 3 phase 50hz | ||||
| Power Consumption | 4.5kw |
||||
| Environment | |||||
|---|---|---|---|---|---|
| Operating Temperatures | +5°C to +40°C |
||||
